TODAY is a Great Day to visit our Store and order the parts you need for your truck!
I found the flasher and checked the wires the red and black have power the green wire dosent even with the turn signal switch on. Is this consistent with a bad flasher or is it just best to replace it
Switch the ignition ON and turn signals ON (either direction), then use a test light to check for power at the yellow and dark green wires entering/exiting the turn signal switch connector under the dash at the right side of the steering column. With the turn signals ON you should see power at the yellow (on left turn) and dark green (on right turn) wires.... Post up what you find.