73-87 Chevy _ GMC Trucks > Brakes, Frame, Steering & Suspension

Raising my truck after lowering

(1/3) > >>

c10rider:
Hello people , I have a 74 C10 , I lowered it 41/2 front I installed 21/2 inch drop spindles and 2 inch drop springs , I put the stock springs back in thinking it was gonna raise it 2 inches well it ended up raising it 4 1/2 inches I’m confused the only thing I can think of is i didn’t put the original springs back in I ordered new ones , any advice on how to lower it 2 inches


Sent from my iPhone using Tapatalk

VileZambonie:
Okay, so you lowered it 41/2= 20.5, installed 21/2 = 10.5, + 2 - 2 - 4.5 = + or - can't remember if put the original springs in to the second power.

So before you get the answer, how did you possibly put the wrong springs back in? Do you have a pile of coil springs?

c10rider:
I ordered new ones from parts geek supposed to be stock ones


Sent from my iPhone using Tapatalk

VileZambonie:
Meaning you put stock replacement springs in and not the original stock springs...

c10rider:
Yes I bought new springs


Sent from my iPhone using Tapatalk

Navigation

[0] Message Index

[#] Next page