73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Interior & Equipment => Power Windows & Door Locks => Topic started by: kfoz on December 15, 2015, 09:35:23 AM
-
Who has done this & are there better conversions kits over others???
ALSO, Ecklers says with their kit you must use 78-87 window sash's for the conversion???
My truck is a 1976 GMC!
A friend of mine has an account with good discounts at Eckler truck so I may go with that.
ANY SUGGESTIONS?
Thanks all! :)
-
I put factory power windows and locks from an 85 in my truck. Wiring, motors, swirches everything. It all Works no problem. I would only use factory stuff, never had to deal with aftermarket kits.
-
Well, I do have an '83 truck I could take that from BUT the motors are weak & one doesn't work. Maybe the switch??
-
When you perform the conversion, I strongly recommend integrating relays into your plan. Augmenting the factory wiring with relays results in a world of improvement and longer service life for the motors. See Wiring up power windows and door locks (http://forum.73-87chevytrucks.com/smforum/index.php?topic=27076.msg225320#msg225320).
-
Well, I do have an '83 truck I could take that from BUT the motors are weak & one doesn't work. Maybe the switch??
When I got the parts for mine, I had 1 weak motor, it was the drivers side. I swapped it with the passenger side, when it finally stopped working, I replaced it. Drivers is still working. I wouldn't let one non working window stop you. If you have a donor with all the parts, things can be fixed. You just have to be logical with your diagnosis of the issue.
-
When you perform the conversion, I strongly recommend integrating relays into your plan. Augmenting the factory wiring with relays results in a world of improvement and longer service life for the motors. See Wiring up power windows and door locks (http://forum.73-87chevytrucks.com/smforum/index.php?topic=27076.msg225320#msg225320).
Also, I recommend this too.
-
73-76 trucks never came with power windows. If it isn't the factory setup I don't know that I would do it... Just depends on the lift motor style. 77-91 doors were redesigned to allow power windows.