73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Brakes, Frame, Steering & Suspension => The Lows (Lowering/Drops) => Topic started by: Swampyankee74 on August 17, 2022, 02:59:17 PM
-
I am looking to order a 2.5" drop spinal kit with brakes calipers and rotors. I was wondering if anyone has had any experience with mcgaughys products? Are they decent? And also looking at a 4" drop shackle kit for the back, from Belltec. Again, is it a decent product?
-
Belltech is good and I had the same 4" shackle hanger kit on mine before I wanted to go lower and switched them out. No problems with it. I can't speak for the McGaughy's spindles as I went with Western Chassis, but I have heard that those spindles don't fit well with most 15" wheels.
-
Ok, I plan on running stock 15 inch rims. You are running 15 inch rims with Western chasis no problems?
-
I've got the 2.5" McGaughy's on mine and they seem to be well made products. The only thing I found is that with anything over 2" spindle and factory 15" wheels you may get rubbing.
-
Yes, my 15"s work with the Western Chassis spindles no problem and I know many others who say the same. The only thing is my wheels are not the factory ones so I can't comment for sure on those fitting.
-
You may need wheel spacers and to clearance the lower control arm depending on the wheels you have.