73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: kmart74 on February 20, 2023, 06:45:57 PM
-
Hello. Newbie here. Does anyone know where hardware can be purchased for a tailgate band? If not, does anyone know what makes up the hardware needed? I believe there are 4 holes
Thank you
-
You'll need 4 washers and 4 screws. That's all that holds that band on.
-
It uses speed nuts and either phillips head or torx screws. You can find nice chromey ones at the hardware store.
-
I lucked out and found an oe band on an old ranch, and it had the speed nuts on it, but I have a rusty Chevrolet tailgate, so I used whatever screws I had to mount it. I drilled through the tailgate, and got some GMC SIERRA badges from a 93 that a friend gave me and installed them