Author Topic: 1984 c10 Tailgate Band Hardware  (Read 592 times)

Offline kmart74

  • New Users
  • Posts: 1
  • Newbie
1984 c10 Tailgate Band Hardware
« on: February 20, 2023, 06:45:57 PM »
Hello. Newbie here.  Does anyone know where hardware can be purchased for a tailgate band?  If not, does anyone know what makes up the hardware needed?  I believe there are 4 holes

Thank you

Offline Scott91370

  • Newbie
  • Posts: 47
  • Newbie
Re: 1984 c10 Tailgate Band Hardware
« Reply #1 on: February 21, 2023, 03:29:27 PM »
You'll need 4 washers and 4 screws.  That's all that holds that band on.
« Last Edit: May 03, 2023, 08:54:14 AM by bd »

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 18980
Re: 1984 c10 Tailgate Band Hardware
« Reply #2 on: February 21, 2023, 07:22:34 PM »
It uses speed nuts and either phillips head or torx screws. You can find nice chromey ones at the hardware store.
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline 84GMCSierra

  • Newbie
  • Posts: 27
  • Newbie
Re: 1984 c10 Tailgate Band Hardware
« Reply #3 on: March 04, 2023, 09:10:51 AM »
I lucked out and found an oe band on an old ranch, and it had the speed nuts on it, but I have a rusty Chevrolet tailgate, so I used whatever screws I had to mount it. I drilled through the tailgate, and got some GMC SIERRA badges from a 93 that a friend gave me and installed them