« previous next »
Pages: [1]   Go Down

Author Topic: 4L60 E rebuild.....  (Read 588 times)

Offline Stewart G Griffin

  • Senior Member
  • ****
  • Posts: 3324
4L60 E rebuild.....
« on: January 24, 2023, 09:15:53 PM »
Ballpark, how much do 4L60 E rebuilds generally cost?

This is if a decent shop is doing it; i'm not going to attempt this at home, kids.

Also, let's talk about 4L60's in general / anything else i should know about?

The 4L60 E in my colorado has crapped out, because-----you guessed it----the 3/4 clutch pack is toast.....
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19022
Re: 4L60 E rebuild.....
« Reply #1 on: January 25, 2023, 04:52:08 PM »
I would charge more than you would pay for a reman unit. They generally cost whatever the builder estimates which is a wide range.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Stewart G Griffin

  • Senior Member
  • ****
  • Posts: 3324
Re: 4L60 E rebuild.....
« Reply #2 on: January 25, 2023, 09:20:21 PM »
i've heard that remans are often cheaper and faster than rebuilding.

i've also heard that the 4L60 E in the colorado is specific to the vehicle, so rebuilding may be the only practical way?


Do torque converters normally get replaced or flushed during a rebuild?
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19022
Re: 4L60 E rebuild.....
« Reply #3 on: January 26, 2023, 04:26:22 PM »
Estimated overhaul with new torque converter, I would charge $3150, does not include R&I and fluids etc. So I'm sure you would find cheaper options with a reman and yes always replace torque converter.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline peewee0413

  • Newbie
  • Posts: 54
  • Newbie
Re: 4L60 E rebuild.....
« Reply #4 on: January 28, 2023, 02:35:39 PM »
https://www.performabuilt.com/product/level-1-street-cruiser-4l60e/
I use the Heavy Hauler, 2400 stall, and  US Shift Quick 4 on my 93 with a built 350 with aftermarket Fuel Injection.
Performabuilt makes one heck of a transmission.

Burnt up two 3rd clutches before buying a Performabuilt.

Sent from my SM-S908U using Tapatalk
Logged
Pages: [1]   Go Up
« previous next »