Author Topic: New here , K10 guy  (Read 1069 times)

Offline jwseiberlich

  • Newbie
  • Posts: 7
  • Newbie
New here , K10 guy
« on: March 06, 2023, 11:50:58 PM »
Hey all,

New here from south jersey .   Check out my ‘85 K10.   Thinking of doing a 4bt Cummins conversion on her with a manual .  Thinking I’ll
Add K20 springs front and rear and her at 14 bolt Semi floater  for the rear-  thoughts on “converting” from K10 to K20?


Offline jwseiberlich

  • Newbie
  • Posts: 7
  • Newbie
Re: New here , K10 guy
« Reply #1 on: March 06, 2023, 11:53:01 PM »



Sent from my iPhone using Tapatalk

Offline jwseiberlich

  • Newbie
  • Posts: 7
  • Newbie
Re: New here , K10 guy
« Reply #2 on: March 06, 2023, 11:53:18 PM »



Sent from my iPhone using Tapatalk

Online dusterdude

  • Newbie
  • Posts: 67
  • Newbie
Re: New here , K10 guy
« Reply #3 on: March 07, 2023, 05:28:09 AM »
Welcome

Sent from my SM-G973U1 using Tapatalk


Offline Mike81K10

  • Site Supporters
  • Junior Member
  • ******
  • Posts: 878
Re: New here , K10 guy
« Reply #4 on: March 07, 2023, 08:22:22 AM »
Welcome from AL. You may want to keep what you have and get another K20 or K30 to do the mods, something with a stronger frame. Then again VZ or a few others would be able to give better advice.
« Last Edit: March 07, 2023, 08:23:53 AM by Mike81K10 »
"Tell me and I forget. Teach me and I remember. Involve me and I learn." -Benjamin Franklin

Offline Mr Diesel

  • Frequent Member
  • **
  • Posts: 325
  • Aaron
Re: New here , K10 guy
« Reply #5 on: March 07, 2023, 08:29:05 AM »
It looks good just like that. I would leave it alone and just drive it and enjoy it.
1976 C20 Crewcab, 6.2L/SM465
1982 K30 Crewcab , 427TD/TH400
1983 C30, 6.2L/TH400
1983 K30 Crewcab 454/700R4
1986 K10 350/400. 1989 K30 cab/chassis 454/SM465

Online Shifty

  • Junior Member
  • ***
  • Posts: 937
  • I bleed Bowtie red...
Re: New here , K10 guy
« Reply #6 on: March 07, 2023, 09:01:36 AM »
Welcome from Tucson AZ!   (I too would leave it as is)
87 V20 Standard Cab Longbed (current)

87 R30 3+3 Longbed (days of yore)

98 C2500 ext cab longbed

Offline jwseiberlich

  • Newbie
  • Posts: 7
  • Newbie
Re: New here , K10 guy
« Reply #7 on: March 07, 2023, 11:01:10 AM »
Springs are tired and need to be replaced anyway , same with the beat 305.   Current set up is a 700r4 and a Corp 10 bolt.

So, if I’m changing parts anyway why not upgrade?  As for frame i’ve read before that essentially the 1/2 ton and 3/4 ton are the same, with changes made to driveline/springs/brakes.

Has anyone had both a K10 and a K20 and can confirm this?


Sent from my iPhone using Tapatalk

Offline JohnnyPopper

  • Senior Member
  • ****
  • Posts: 2526
  • Old Goof
Re: New here , K10 guy
« Reply #8 on: March 08, 2023, 09:03:38 PM »
Welcome from SoCal the land of fruits and nuts...

What is your aim? Daily, work, what?

Let that determine your changes.

Nice ride, look forward to your progress.  8)
1957 Apache 3100 235 Inline 6, 3 on the tree
1973 C-20, 3+3 454 4BBL TH400  Water Injection
1978 K-10, 350 4BBL TH350 NP203 M.M. Part time Kit/Hubs
1980 C-10 under construction

Offline jwseiberlich

  • Newbie
  • Posts: 7
  • Newbie
Re: New here , K10 guy
« Reply #9 on: March 08, 2023, 09:39:05 PM »
Good question - aim is a solid driver , not daily but often.  Not looking to win races but would love some good torque and fuel efficiency that a diesel offers

And Will use truck as a tow rig (boat or camper).  This rig is also my Home Depot running truck , I’ve been known to source things like heavy pavers/bricks with it.    Here’s a pic of the truck loaded to the wheelwells with bricks from a demolished factory in fishtown, Philadelphia .   Interestingly , but not surprisingly , I dropped a U joint the following day .     

Simply, I’d love to beef up the entire truck and make it last a long , long time .

But There won’t be any crazy off roading or abuse of the vehicle, but she gets worked from time to time- it’s a truck, afterall .





Sent from my iPhone using Tapatalk