« previous next »
Pages: [1]   Go Down

Author Topic: 12 bolt or 10 bolt??  (Read 5503 times)

Offline cooltoolguy

  • Newbie
  • Posts: 84
12 bolt or 10 bolt??
« on: November 25, 2005, 06:06:00 PM »
i just pick up a 76 c-10 to part out with a 12 bolt rear, not sure of gear ratio yet.  now the 86 has a 10 bolt and i have an 84 with a 10 bolt.  question is...  what is the difference between a 12 bolt and a 10 bolt and what would be better to use in a build up (more hp from engine)  any help greatly appreciated.   thanks steve

Logged

Offline roundedline

  • Administrator
  • Senior Member
  • *****
  • Posts: 2228
Re: 12 bolt or 10 bolt??
« Reply #1 on: November 25, 2005, 05:33:00 PM »
The difference is the 12bolt is stronger.  It has a 8.875" ring gear versus a 8.5" ring gear on the 10bolt.

Chris Lucas
www.73-87chevytrucks.com
www.captkaoscustoms.com
Project Su
Jimmy 2WD Project

Logged

Offline Blazin

  • Blazin new trails!
  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6130
Re: 12 bolt or 10 bolt??
« Reply #2 on: November 29, 2005, 06:24:00 AM »
The other difference is the U Joint size, the cap diamiter is if I remember corectly smaller on the 12 bolt yoke, and the length of the cross is also different. You can get a jont with both dimensions for this aplication.

Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline cooltoolguy

  • Newbie
  • Posts: 84
Re: 12 bolt or 10 bolt??
« Reply #3 on: November 29, 2005, 08:13:00 PM »
thanks for the info.  there is a local shop who makes there own driveshafys, yokes , cap etc.  the guy i got the truck from took the engine, trans, drive shaft and cap too.

Logged
Pages: [1]   Go Up
« previous next »