Author Topic: 1991 1/2ton 4x4 suburban wheel studs  (Read 3074 times)

Offline 83 NM K10

  • New Users
  • Posts: 1
  • Newbie
1991 1/2ton 4x4 suburban wheel studs
« on: March 02, 2020, 08:05:38 PM »
hey guys, i've been lurking around here for a little while reading & learning but came across an interesting deal today!

i have an 83 k10 i'm putting together but came across a 91 suburban that i couldn't pass up. 
anyway, i was rotating the tires this morning and found that the rear axle has 7/16" wheel studs and the front axle has 1/2" wheel studs.  both axles are 6 lug and all the wheels fit the 7/16" just fine...

thoughts, suggestions??!!

Offline fitz

  • Senior Member
  • ****
  • Posts: 2084
Re: 1991 1/2ton 4x4 suburban wheel studs
« Reply #1 on: April 09, 2020, 01:55:20 PM »
I can't help you with the wheel studs but I'd love to hear / see more details about the roof on that suburban.
That's a sharp rig, never seen one with a roof like that before.

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7543
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: 1991 1/2ton 4x4 suburban wheel studs
« Reply #2 on: April 09, 2020, 02:49:17 PM »
I did a little cross checking and what I have found is they had 7/16" in 1991.  Front rotors must have been changed is what I am thinking
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/