73-87 Chevy _ GMC Trucks > 4 Wheel Drives

Cheapest 4" lift with skyjacker springs for under $700 with everything you need

<< < (2/3) > >>

Irish_Alley:
U-BoltsGM Dana 60 Front U-Bolt & Stud Kit (still need blocks and bolts for the rear)
$60

Skyjackers kit
Skyjacker C140C
Includes: 3.5" Rear Blocks (2), U-Bolts 5/8 x 2-3/4 x 12-1/2 (4), U-Bolts 5/8 x 3-1/8 x 9-1/2 (2), Round U-Bolt 5/8 x 4 x 10 (1), Coarse Thread Bolts 5/8 x 3-1/4 (2), Hardware.
$135.49

Skyjacker C140B dana 44 or 10 bolt
Includes 3.5" Rear Blocks (2), U-Bolts 5/8 x 3-1/8 x 7-1/2 (3), U-Bolts 5/8 x 3-5/8 x 9-1/4 (1), Round U-Bolts 5/8 x 3-3/8 x 13 (4), Hardware.
135.49

Rough Country's Kit
$315.60

Irish_Alley:
Steering FixGM Dana 60 Front U-Bolt & Stud Kit
$53
or
pitman arm
$117.17

73-87 1/2 & 3/4 Ton Chevy Raised Steering Arm 4"-8" lift
$60

73-87 1/2 & 3/4 Ton Chevy Adjustable Drag Link
$69.99

Rough Country's Kit
$315.60

Irish_Alley:
Brake hoseOEM
for the dana 60
Right side 19.5"

Left side 19.5"

ORD brake hose "kit"
Vehicle Year   Front Caliper Year/Make         Lift Height   Part #        Front Line Length      Rear Line Length      Banjo Bolt Size   Price   
'77-'87      GM Dana 44, 10 bolt Dana 60        3"-6"   GU30011                      25"                     18"                           10 mm
for $110

OR

change your year to a 2wd and it should have the same calipers (little know fact dana 60 calipers are also used on the c30)

Front left 23" $16.99

Front right 23.125" $17.99

the rear size is 14.5 the ext. line is 18" so for 3.5" and thats for the 6" kit and im only using 3.5" blocks so its a difference in 2.5". new lines for 1.5"??? im going to keep my oem one

OK after using the info enaberif posted about brakes lines ive done some digging to find out what fits what as far as brake lines and shocks. With the brake lines youre going to want to get one from a 2wd and some 4wd but they come with brackets on them. Youre going to have to cut the bracket off carefully. Might be able to pry it off but be careful not to damage the hose

if you have a 73-78 with the 7/16 banjo bolt you want

36760 for the left front. This comes stock on a 73-78 C30 $14.85
36759 for the right front. This comes stock on a 73-78 C30 $14.85

78+ have a 10mm banjo bolt

if you have a 78-91 K1500 or K2500

38622 for the left front. This comes stock on a 94 K2500 8600lbs $20.25
38623  for the right front. This comes stock on a 94 K2500 8600lbs $20.25


if you have a 78-91 K3500

36952  for the left front. This comes stock on 78-91 C30 $14.13
36957  for the right front. This comes stock on 78-91 C30 $14.13

IF you really want stainless then you can buy a universal line (like the ones from skyjacker) from
summit for the front

657370 russell 21
$27.97

657380 russell 24
$29.97


Jegs rear brake hose
635400 16"
27.99

Rough Country's Kit
$315.60

Irish_Alley:
ok talked to rough country and they wont just sell parts unless youve bought a kit from them. well lucky me i got one years ago(but they didnt verify anything). so i was still planning on using skyjackers front springs $333.86 if you add their kit for 315.60 it will be $649.46

The front ubolts and bolts are $59.95
The rear ubolts are $29.95
Blocks would be $47.95
The front steering block is $52.95
The shocks are $39.95 each ($159.80)



so you can buy shocks for $26/each napa brand (total $104) or $40 rough country (total $159.80). BUT if you order their "kit" its only $315.60 so they take $35 off their kit which separate would cost $350.60. So if you buy napa shocks youre only saving $45 but the kit will save you $35. so youre only saving $10 for napa shocks vs ones made for the lift

Irish_Alley:
put something together for you guys

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version