73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Brakes, Frame, Steering & Suspension => Topic started by: Chevynut73 on January 24, 2023, 07:48:16 AM
-
Got a '73 C10 long bed and have seen some folks do the frame cut bolt/weld back together to make it a short bed.
Found on the Brothers Truck Parts site a kit to help with this.
Please share any experience or ideas on this.
Thanks
-
Never done it, but I'm in for pics! :D
-
Several posts about this http://www.73-87chevytrucks.com/lwb_to_swb.htm but some fair warning:
1) are you a good welder?
2) do you have a good welder?
If not do not even think about doing this yourself. I prefer the offset staggered cuts as opposed to a straight cut. To me it provides a better spread across the grain rather than a single point wich could stress crack. I did a write up on it but it got photobucket bombed and all of the images were lost.
-
Email James at jimboschoppers@yahoo.com
He has kits for this.
-
Several posts about this http://www.73-87chevytrucks.com/lwb_to_swb.htm but some fair warning:
1) are you a good welder?
2) do you have a good welder?
If not do not even think about doing this yourself. I prefer the offset staggered cuts as opposed to a straight cut. To me it provides a better spread across the grain rather than a single point wich could stress crack. I did a write up on it but it got photobucket bombed and all of the images were lost.
Yes, my neighbor is a very good welder.
And the Truck has long been retired - no more working her with heavy loads :)
Thanks
-
You're in for it NOW! ;D
-
Got the kit shipped to me - hope to start this project in a couple of weeks.
-
Still watching......and waiting...... ;D
-
We did the cut/ bolt up/ weld up yesterday.
Now she's a shorty ;D
Don't know how to get photos on here though?
-
Look on this site for software called PIXresizer.
-
We did the cut/ bolt up/ weld up yesterday.
Now she's a shorty ;D
Don't know how to get photos on here though?
:-*