1
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
TODAY
is a Great Day to visit our
Store
and order the parts you need for your truck!
Home
Forum
Store
Help
Search
Gallery
Login
Register
73-87chevytrucks.com
»
73-87 Chevy _ GMC Trucks
»
Performance
»
MPFI conversion
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: MPFI conversion (Read 3998 times)
mean87
Newbie
Posts: 7
MPFI conversion
«
on:
December 11, 2010, 08:07:35 AM »
I have an 87 Silerado i have been workin on the past 2 years. The engine is a 350 .40 over with 10.5 to 1 compresion. The cam has a 480/498 lift 226/234 duration at .050 that breaths through a set of Pro torker vortec 2.02/1.6 heads. The engine is fed by an Edelbrock Pro Flo 3502 efi and 670 holley throttle body. My chip was design to spec by Westers Garage. My problem is the truck is gettin way to much fuel. I discovered that the vacuume line on the MAF sensor was broke i replaced it and it seemed to help but it did not fix the problemany onehave any other suggestions.
Logged
VileZambonie
Global Moderator
Senior Member
Posts: 19010
Re: MPFI conversion
«
Reply #1 on:
December 11, 2010, 02:28:03 PM »
I think you mean MAP sensor. Make sure you have a good vacuum signal to the map sensor. Do you have diagnostic interface capabilities?
You may want to ask some more questions over at Edelbrocks forum
http://forums.edelbrock.com/forums/forumdisplay.php?f=34
Logged
, ___
/ _ _ _\_
⌠ŻŻŻŻŻ' [☼===☼]
`()_);-;()_)--o--)_)
74 GMC
,
75 K5
,
84 GMC
,
85 K20
,
86 k20
,
79 K10
mean87
Newbie
Posts: 7
Re: MPFI conversion
«
Reply #2 on:
December 14, 2010, 09:53:16 PM »
Yes the MAP sensor. I have not checked the vacuum pressure yet what range should i be in. As for diagnostic capabilities i do not have a diagnostic tool i intend on gettin one. first chance i get ill test it and keep you posted. Thanks for the input
Logged
Blue 82
Frequent Member
Posts: 281
Re: MPFI conversion
«
Reply #3 on:
December 15, 2010, 05:29:30 PM »
I know this sounds like a dumb question but how do you know it's getting too much fuel?
Check your messages
«
Last Edit: December 15, 2010, 06:14:08 PM by Blue 82
»
Logged
82 stepside 2wd 355/th350/3.08 posi
mean87
Newbie
Posts: 7
Re: MPFI conversion
«
Reply #4 on:
December 15, 2010, 08:10:45 PM »
The engine will flood out and stall at idle, Spews smoke that turns to black with an increase of throttle, Spark plugs soaked in fuel
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
73-87chevytrucks.com
»
73-87 Chevy _ GMC Trucks
»
Performance
»
MPFI conversion