Author Topic: 1979 brown/tan restoration...need paint codes!  (Read 2537 times)

Offline yzrider

  • Newbie
  • Posts: 21
1979 brown/tan restoration...need paint codes!
« on: August 27, 2015, 04:51:08 AM »
Hey everybody,
I am finishing up restoration on my 1979  crew cab c30. It was two tone brown and tan but I can't seem to find the paint code For the tan. The brown I plan to use chesterfield brown from 77 trans am!

This truck was a real project! New fenders, new front doors, replaced rockers, floors, tons of sanding and panting underneath the truck. Can't wait to get it painted!

Offline jhiggin

  • Newbie
  • Posts: 39

Offline LTZ C20

  • Senior Member
  • ****
  • Posts: 3795
  • "I'm here for a good time" -George Strait
Re: 1979 brown/tan restoration...need paint codes!
« Reply #2 on: August 27, 2015, 10:00:14 AM »
Welcome from central California. That truck looks great! Love it!
LTZ Cheyenne C20

Offline yzrider

  • Newbie
  • Posts: 21
Re: 1979 brown/tan restoration...need paint codes!
« Reply #3 on: September 14, 2015, 11:21:15 AM »
That picture is from before I started the resto work! Wait till the after, should be gorgeous!

Offline LTZ C20

  • Senior Member
  • ****
  • Posts: 3795
  • "I'm here for a good time" -George Strait
Re: 1979 brown/tan restoration...need paint codes!
« Reply #4 on: September 14, 2015, 01:42:35 PM »
How could it get better? It's already sparkling and shiny in that pic!
LTZ Cheyenne C20

Offline yzrider

  • Newbie
  • Posts: 21
Re: 1979 brown/tan restoration...need paint codes!
« Reply #5 on: September 17, 2015, 10:12:26 AM »
You can see on the front fender by the trim a rust spot, the inside of the doors, spots on fenders, and the rockers were rotted. Replaced the front doors, front fenders, rockers, a ton of sanding,ton of prep, and sent it to maaco (gasp!) we'll see how it turns out its there now!

Offline LTZ C20

  • Senior Member
  • ****
  • Posts: 3795
  • "I'm here for a good time" -George Strait
Re: 1979 brown/tan restoration...need paint codes!
« Reply #6 on: September 17, 2015, 01:40:13 PM »
Oh yea I missed that spot on the fender. Doesn't Maaco mean Uhooh?
LTZ Cheyenne C20

Offline yzrider

  • Newbie
  • Posts: 21
Re: 1979 brown/tan restoration...need paint codes!
« Reply #7 on: September 17, 2015, 02:03:28 PM »
I'm hoping they do a good job. I paid for their best paint job, 2 stage paint with a sealer first, and I did all the prep work to my level of satisfaction.  So if they do any more prep its good, and just don't do a bad job painting and were good!

Offline LTZ C20

  • Senior Member
  • ****
  • Posts: 3795
  • "I'm here for a good time" -George Strait
Re: 1979 brown/tan restoration...need paint codes!
« Reply #8 on: September 18, 2015, 01:54:35 PM »
My friend had his truck painted by miracle and it was a pretty good job (about 4k) but in the spots that don't normally show or are not always seen you can tell.
LTZ Cheyenne C20