Pinion Angle Help

[JohnnyPopper]

Push up / Pull down slop is what mine had before I replaced it.

There should be no movement.

Vibration is now gone.

[Backwoodsballer]

Awesome, thanks JohnnyPopper.  I think we are starting to narrow this down.

Ill call into to Tom Woods today and see if they think i should stick with the conventional shaft (OEM) with a single joint on either end or if i should just move up to a double cardon joint.

[bo3mrr@aol.com]

I would drop the transfer case first.  It will more than likely take care of it.

[Backwoodsballer]

Just wanted to post up my findings after installing the Tom Woods Double Cardan Shaft.  The vibrations are definitely less now with a proper shaft and proper angles for the double cardan.  The remaining vibration im having are likely related to the wheels i have so ill be taking them to be balanced soon.  I ran the truck up to 72mph yesterday, and the only vibration i felt was one that seemed to be tire related.


Thank you all for your help!!

[JohnnyPopper]

Happy ending! Love it!