Can anyone help identify the color of wires going to the pins of the relay in the attached pic?
This is the only new harness I could find. The wiring on my 76 has a different pin position on the relay.
The numbers on the sketch are the numbers on the relay.
Thanks,
Pugsy
Edit:Info in case anyone wants to change over to the newer style harness.
#1 and #2 need to cut the wire that comes with the new harness close to the terminal and solder the 10 ga wire on directly.
#1 is PPL 10 ga to blower
#2 is OR 10 ga BATT
#3 is BLK ground
#4 is OR from switch (HIGH) This activates the coil.
#5 is DK BL from resistor