73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Performance => Topic started by: 1983chevyug on November 08, 2007, 10:29:47 PM
-
i know it can be done but want to know what it is that i need for this project. thanks for you time 1983 chevyug
-
You should checkout CaptKaos' build thread. He's pretty deep into that swap already. I can tell you that you'll need motor mount adapters, pilot bearing spacer(depending on what trans you use), a wiring harness from a donor truck(you can find the 5.3 harness on ebay pretty cheap), and a ECM(computer). I did the swap, but I put a carburetor - now I kinda wish I had put fuel injection while I had the chance. Either way, you'll get tons of "cool points" when you pop the hood and show people what's in there. Good luck with your swap.
-
Check my thread, although currently on hold, we are in the end of the swap, I just need to get the harness connected to crank it. Then we can get the body work started...
http://forum.73-87chevytrucks.com/smforum/index.php?topic=5225.0