« previous next »
Pages: [1]   Go Down

Author Topic: Need 12V hot when ignition on only.  (Read 1416 times)

Offline Stewart G Griffin

  • Senior Member
  • ****
  • Posts: 3324
Need 12V hot when ignition on only.
« on: October 20, 2019, 03:14:50 PM »
On the fuse panel, is an "Accessory" slot, the same as an "Ignition" slot?

That is, are the "Accessory" slots only providing power when the key is in the "on" position ONLY----like an "Ignition" slot?

i'm running out of slots which is why i'm asking.
Logged

Offline MIKE S

  • Registered Users
  • *
  • Posts: 224
  • Member
Re: Need 12V hot when ignition on only.
« Reply #1 on: October 20, 2019, 06:08:27 PM »
I’m pretty sure the difference between the two is ignition only comes on during cranking and run. Accessory would come on when the key is turned backwards from off and in run but not while cranking.
Logged

Offline bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6450
Re: Need 12V hot when ignition on only.
« Reply #2 on: October 20, 2019, 08:48:34 PM »
This ^^^^^.
Logged
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)
Pages: [1]   Go Up
« previous next »