All Classified forums require a Site Supporter subscription. It is only $25 per year and you can buy and sell whatever you like on the forum. To become a Site Supporter, go to Your Profile and select "Paid Subscriptions."
How can I isolate the switch and test the motor? I tried unplugging it underneath the dash to try and jump power through to the motor but failed at that not knowing what wire to use. I haven't purchased another motor as of yet so I'm still trying to determine which part is bad.
Inside the cab with the delay module disconnected on both ends the black plug is hot on the purple and gray wires only. The color of the wires in that plug are pink, purple, black, gray and black with blue stripe. Under the hood all the wires are hot with the switch off except the black with blue stripe.
And, the motor doesn't run when probing any of the wires under the hood from the rear of the plugs with a test light.