Hello everyone, this is my first post and I really need some assistance.
First off, hello, My name is Marc and I have a 1987 R10 2WD R10. It's like a forest green color, lowered in the back with Autozone drop shackles, and cut springs in the front. I know not the mot elegant way to drop the truck, but at the time it's all I can afford. I will do it in a better configuration when I can afford it. I have also swapped out the tired old 305 TBI to a 383 stroker with a Comp cam with a medium "aggresiveness" profile, a Holley 650 Carb, Weind intake, Eagle flat top pistons, rods and crank. Also have an Accel HEI yellow distributor that I'm going to be putting in soon, with a true dual custom 2.5" exhaust with an X-pipe and tips that exit before both rear tires.
Anyway my question is, I'm swapping the original 700R4 for a 2wd NV3500 manual transmission. Now my truck has a 27 spline output shaft and the NV has a 32 spline shaft. I just need to know what driveshaft to use, or if I can swap just the yoke and where to get one? I have everything else sorted, the driveshaft is the only thing hanging me up. What year would the driveshaft have to come from? what length would I need? I have googled this 8,000,000 times and come up with nothing. Maybe I'm just missing it, but any help would be greatly appreciated. Thanks guys!
Marc B.
also, when I get a chance to wash it up and do some decent detailing, I will take some pictures and make a proper introduction thread in the welcome sub-forum, thanks again for the help guys!