73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: MY1978 on April 18, 2021, 07:13:48 AM
-
I need to repaint my air filter housing and I want to paint my master cylinder. I may also touch up radiator and engine bay wheel wells. I want to use a flat black and was wondering about any suggestions for the paint. Will high heat Rustoleum primer and paint be a good choice? This is not a show truck, this my driver a few times a week, during nice weather, so do not need any fancy ceramic, high priced, shiny paint.
Thanks
-
That's a good choice. They also make a satin finish, not shiny but not flat. Subtle.
Make sure you clean surfaces thoroughly, I use brake cleaner on bare metal prior to shooting.
Painters tip: use a blow dryer to gently heat the paint can. Two benefits: paint flows easily, and pressure increases slightly inside the can, causing a finer spray.
I also preheat the surface that I'm painting the same way for the same results.
Post some before and after pics!
-
Thanks and will be sure to post pics.