73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: AmericaMade on January 26, 2018, 07:30:30 PM

Title: How to remove Part
Post by: AmericaMade on January 26, 2018, 07:30:30 PM

Just wondering how to remove this circled area.
Do I also have to remove the AC lines just to replace this gasket?
https://ibb.co/gHuLKG

Title: Re: How to remove Part
Post by: FlatBlack77 on January 26, 2018, 08:43:04 PM

that is the cruise control vacuum canister whatyacallit if i am not mistaken

If I remember correctly its mounted on a tab that is held on by an intake manifold bolt. Or a bolt on the back of the head. Its been 4 years since i took one off

Title: Re: How to remove Part
Post by: VileZambonie on January 27, 2018, 07:12:13 AM

Cruise Control Servo

Title: Re: How to remove Part
Post by: NCali on February 17, 2018, 08:57:13 PM

There are two 3/8 bolts behind the head that are impossible to remove with the engine in the vehicle. there are also three screws holding it to the bracket behind the servo

good luck