Author Topic: 78 RCSB 2wd C10 6.0 Swap New Question  (Read 2387 times)

Offline CA78C10

  • New Users
  • Posts: 2
  • Newbie
78 RCSB 2wd C10 6.0 Swap New Question
« on: May 30, 2019, 10:27:47 PM »
Might be a dumb question but will the stock 6.0 Oil Pan fit my 78 C10, it's got a 350 3 speed now. I'm gonna start getting all needed parts.

Offline Rich84

  • Newbie
  • Posts: 50
Re: 78 RCSB 2wd C10 6.0 Swap New Question
« Reply #1 on: May 31, 2019, 09:23:13 AM »
It will fit fine . It will hang a little below the crossmember. It depends what mounts you use. Might be a little risky with a lowered truck. Mine sits about an inch and a half below. No big deal at stock height. 

Offline Rapid Roy

  • Junior Member
  • ***
  • Posts: 635
  • Euless, Texas
Re: 78 RCSB 2wd C10 6.0 Swap New Question
« Reply #2 on: May 31, 2019, 10:46:00 AM »
Welcome
1974 Cheyenne 10 LWB STOCK 350 W HEI /TH350/AC/4 BBL Quadrajet
Mopar by Birth
Chevy by Choice

Offline CA78C10

  • New Users
  • Posts: 2
  • Newbie
Re: 78 RCSB 2wd C10 6.0 Swap New Question
« Reply #3 on: June 01, 2019, 05:32:54 PM »
It will fit fine . It will hang a little below the crossmember. It depends what mounts you use. Might be a little risky with a lowered truck. Mine sits about an inch and a half below. No big deal at stock height. 
Not planing on lowering it. Thanks!
Welcome
Thanks! Imma be in here quite often in the coming month's