Well I just got my new cam in, and, no matter what I do I can't get the valves adjusted right. I've done it the clean way, the messy way and nothing seems to work. When I get the rockers quited down theres no power, but bring the rockers back up about 1/2 turn, monster power but it sounds like it's got a solid cam. The new bumpstick is a Comp cams .480 lift, 220 degree duration @ .050 lift. Unfortunately it didn't come with new lifters so I reused the old ones, which are only about 6 months old.Am I going to have to get new lifters? From What I've been told, the springs in my heads are good for at least .480 to .500 lift. Please help, I really miss waking up my neighbors !!
Edited by: Z28 c10 at: 3/14/06 11:15 pm