All Classified forums require a Site Supporter subscription. It is only $25 per year and you can buy and sell whatever you like on the forum. To become a Site Supporter, go to Your Profile and select "Paid Subscriptions."
also, previous owner removed drivers side fuel tank and also the switching valve. the fuel gauge always reads 1/2 tank. in the wire harness that should be plugged into the switching valve I've jumpered the pink/black to the pink but still no action on gauge. not sure if I'm doing it right or if there's something else I need to do. tank selector switch is new and set to LH tank also
Have you checked valve lash? Take off the valve covers and see if you can move the rockers by hand easily
...the valves are rattling very bad when accelerating or going up a decent incline. I've tried setting the timing with a light but if i get the mark anywhere near the mark gauge it dies. I can't even get it close to the plate....