Author Topic: can't find this panel  (Read 1727 times)

Offline jimishortbed

  • Newbie
  • Posts: 9
  • Newbie
can't find this panel
« on: February 23, 2019, 08:44:35 PM »
My truck is a '82 gmc sierra. I need to replace both outter rockers, one inner rocker, and one floorpan.
I also need to fix a place under the seat. It' the panel to replace this rusted floor section that I can't seem to find.
I see the entire cab floor, but the drivers side on my truck is rust free. The place under the is small and on the passenger side. I guess I can make a panel to fix it but a Pre-fab panel sure would make it easier.

I don't even know what to call the panel I'm looking for.

Offline jimishortbed

  • Newbie
  • Posts: 9
  • Newbie
Re: can't find this panel
« Reply #1 on: February 23, 2019, 08:48:17 PM »
im trying to oost a picture

Offline Ed4all10

  • Newbie
  • Posts: 47
  • Newbie
Re: can't find this panel
« Reply #2 on: February 24, 2019, 12:11:46 PM »
I’m sure someone on here will be able to help more, but when I replaced my floor, both sides were rusted and I bought the whole floor panel. I don’t remember seeing just part. Good luck.

Offline jimishortbed

  • Newbie
  • Posts: 9
  • Newbie
Re: can't find this panel
« Reply #3 on: February 24, 2019, 10:31:33 PM »
im just going to make the panel myself.
thanks for the reply Ed4all10.

Offline Captain Swampy

  • Junior Member
  • ***
  • Posts: 504
  • Wisconsin
Re: can't find this panel
« Reply #4 on: February 25, 2019, 09:39:54 PM »
Look in the store on this forum. Up at the top towards the left is a button for the store.
1987  350TBI 700R4  4X4  4.56 gears  33" BFG All Terrain


http://forum.73-87chevytrucks.com/smforum/index.php?topic=32209.0

Offline jimishortbed

  • Newbie
  • Posts: 9
  • Newbie
Re: can't find this panel
« Reply #5 on: April 17, 2019, 06:42:43 PM »
I cut the rust out.

Offline jimishortbed

  • Newbie
  • Posts: 9
  • Newbie
Re: can't find this panel
« Reply #6 on: April 17, 2019, 06:48:58 PM »
I cut out the rust

Offline jimishortbed

  • Newbie
  • Posts: 9
  • Newbie
Re: can't find this panel
« Reply #7 on: April 17, 2019, 06:53:21 PM »
I cut the under seat panel and floor pan I needed from a donor truck