Author Topic: 86 K30 won't start or shift into gear  (Read 1984 times)

Offline leadlobber7

  • Newbie
  • Posts: 24
  • Newbie
86 K30 won't start or shift into gear
« on: September 01, 2018, 12:25:52 AM »
I just changed my ignition switch on my 86 K30 454 TH400 4x4. I did drop the steering column by loosening the two bolts on the engine side of the firewall and also removed the 2  large bolts under the dash that upward support the steering column and the 4 bolts that bolt around the steering column. I got everything put back together and now my truck won't start and it won't go in gear.  I've no idea what's going on. I Any help would be appreciated. Thank you

Sent from my SM-G930V using Tapatalk
« Last Edit: September 01, 2018, 09:33:49 AM by bd »

Offline bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6438
Re: 86 K30 won't start or shift into gear
« Reply #1 on: September 01, 2018, 09:50:05 AM »
Leadlobber, your mailbox is full.  Delete some of your PMs if you wish to receive new messages.  Your struggle with posting new threads may be a temporary conflict with Tapatalk.
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)

Offline bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6438
Re: 86 K30 won't start or shift into gear
« Reply #2 on: September 01, 2018, 09:55:29 PM »
Does the starter crank?
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)