« previous next »
Pages: [1]   Go Down

Author Topic: Hey just curious  (Read 1920 times)

Offline scoob4444

  • Newbie
  • Posts: 4
  • Newbie
Hey just curious
« on: February 12, 2014, 01:40:25 AM »
How many degrees should my vacuum advance, advance the spark on a 350?

Sent from my XT1080 using Tapatalk

Logged

Offline Irish_Alley

  • Tim
  • Global Moderator
  • Senior Member
  • *****
  • Posts: 13319
  • Family is not an important thing. It's everything.
Re: Hey just curious
« Reply #1 on: February 12, 2014, 04:27:47 AM »
it should be only 20° so lets say you set your timing at 16° your advance should be 36°. now not all advances are the same stock is different than aftermarket and 20° should be stock
Quote from: rich weyand on June 20, 2013, 11:46:02 PM
You want 36* of advance at 3000 rpm with the vacuum advance disconnected.  For stock distributors, this should 16* at idle with the vacuum advance disconnected.
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline scoob4444

  • Newbie
  • Posts: 4
  • Newbie
Re: Hey just curious
« Reply #2 on: February 12, 2014, 03:54:06 PM »
Why thank you

Sent from my XT1080 using Tapatalk

Logged

Offline Stewart G Griffin

  • Senior Member
  • ****
  • Posts: 3324
Re: Hey just curious
« Reply #3 on: February 16, 2014, 09:41:24 AM »
These are some very good papers on timing, ignition etc.:
http://www.digitalcorvettes.com/forums/showthread.php?t=75830
Logged
Pages: [1]   Go Up
« previous next »