Author Topic: Distributor power wire.  (Read 2050 times)

Offline Funkatation

  • Newbie
  • Posts: 99
  • Newbie
Distributor power wire.
« on: March 26, 2016, 08:38:54 PM »
Can someone point me to some documentation on where the distributor power wire goes to? I don't think the stock one is the right gauge for the higher power modules in HEI.  I need to replace the whole wire.  74 GMC if that matters.

Thanks!

Offline hatzie

  • Junior Member
  • ***
  • Posts: 771
Re: Distributor power wire.
« Reply #1 on: March 26, 2016, 08:56:20 PM »
Can someone point me to some documentation on where the distributor power wire goes to? I don't think the stock one is the right gauge for the higher power modules in HEI.  I need to replace the whole wire.  74 GMC if that matters.

Thanks!
GM wiring diagrams.  Look in my signature.
If it's the stock ignition wire it's a resistance wire.

Sent from my SM-P605V using Tapatalk

SVC & wiring mans --> Here http://tinyurl.com/7387BRD-SVCMAN or My Bucket @ http://tinyurl.com/SQ-SVCMAN
Parts & Illustr Books -->http://tinyurl.com/SqParts
GMSTG Textbooks-->http://tinyurl.com/STG-TEXTBK
Radio Manuals-->http://tinyurl.com/DELCORADSVC

Offline TheBigHat

  • Newbie
  • Posts: 35
  • Newbie
Re: Distributor power wire.
« Reply #2 on: October 28, 2021, 07:14:15 PM »
Did you get this figured out? I'm not getting any power to my HEI distributor on my 78' K20. I looked in that manual and didn't find anything all that specific about it. It seemed to be pointing me toward ignition switch so I put another one in it but got no fire still.