Author Topic: 79 K10 build  (Read 19132 times)

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 18975
79 K10 build
« on: January 01, 2020, 09:18:21 AM »
I've been building this 79 K10 for a buddy of mine. Truck was butchered when I got it, blocks front and rear, hacked exhaust, hacked wiring, barely ran, had wrong bumpers rigged up, you name it. So I've gone through it mechanically, built a dual exhaust system, got it running great, new suspension lift, new driveshafts, brakes and lines, fixed fuel gauge and dual tank setup, pulled about 10 lbs of mouse nest out. He wants me to pull the body and do a full restore so I figured I'd start a thread where I can dump more pictures when I get a chance. These pictures aren't very good but I need to get a new phone today because I dropped it, so I'll take more pics later and update this thread.





,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline JohnnyPopper

  • Senior Member
  • ****
  • Posts: 2518
  • Old Goof
Re: 79 K10 build
« Reply #1 on: January 01, 2020, 06:44:31 PM »
Looks strangely familiar... 8)  Nice work!

Did '79 and '80 have the same one-piece bezel for the headlight and signal?

The '80 I'm into has the one piece, However, I found that same year parting out, with the rectangular headlights, buckets, and trim.

I had to make sure my core support had the right anchor point options, Good to go!

When I finally get this one done she will have a face lift in the eye section...,  ;D
1957 Apache 3100 235 Inline 6, 3 on the tree
1973 C-20, 3+3 454 4BBL TH400  Water Injection
1978 K-10, 350 4BBL TH350 NP203 M.M. Part time Kit/Hubs
1980 C-10 under construction

Offline DanMcG

  • Registered Users
  • *
  • Posts: 141
Re: 79 K10 build
« Reply #2 on: January 02, 2020, 05:03:21 AM »
good looking truck!

Offline Shifty

  • Junior Member
  • ***
  • Posts: 934
  • I bleed Bowtie red...
Re: 79 K10 build
« Reply #3 on: January 02, 2020, 08:35:18 AM »
Gonna be a goody!  8)
87 V20 Standard Cab Longbed (current)

87 R30 3+3 Longbed (days of yore)

98 C2500 ext cab longbed

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 18975
Re: 79 K10 build
« Reply #4 on: January 04, 2020, 06:29:07 AM »
It's come a long way. I'll have to find the pics of how it looked when I got it. What a mess!

Quote
Did '79 and '80 have the same one-piece bezel for the headlight and signal?
The '80 I'm into has the one piece, However, I found that same year parting out, with the rectangular headlights, buckets, and trim.

79 & 80 had the large surround bezel and lower grille molding. 80 also offered the rectangular or round headlights. They also added the body line in the front of the hood for these years.
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 18975
Re: 79 K10 build
« Reply #5 on: February 22, 2020, 06:57:24 AM »
To say that the cabin smelled like a barnyard is an understatement:











Someone removed the majority of the AC components, so AC is being put back in it as well with mostly new components. The good news is it no longer smells like death inside the cab.
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 18975
Re: 79 K10 build
« Reply #6 on: April 20, 2020, 03:03:19 PM »
Forgot to update this thread. Next phase is pulling the bed off and stripping down the body. I have another pile of parts here including a new vapor canister which I found an nos mount for. I never understood why people eliminate these. You can relocate and hide them people. Power steering brackets, since the good ole let's put headers on hack job happened to it somewhere along the way, probably about the same time they ripped all of the AC components out because ya know, "it robs horsepower" being there. New cab supports, and body mounts, front fenders, inner fenders, hood, doors, battery tray, body, fuel senders, and the hvac vacuum reservoir since he's "borrowing" the one I took off of another one of my trucks. I've discovered the original color was silver so I am trying to convince him to let me paint it a similar color or shade of grey. I hate that I keep getting pulled off my own projects but we are also bartering and he is paving my new worlds most asphalt driveways. Pics and details to come soon.
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline chewy92

  • Newbie
  • Posts: 25
  • Newbie
Re: 79 K10 build
« Reply #7 on: April 20, 2020, 05:47:34 PM »
Good thing the stuffs are getting corrected on that truck. Have fun

Offline Mike81K10

  • Site Supporters
  • Junior Member
  • ******
  • Posts: 873
Re: 79 K10 build
« Reply #8 on: April 29, 2020, 07:45:10 AM »
My truck was non A/C and I am putting a Vintage Air Gen IV in it. Wish it had been an A/C truck. I still have my original Charcoal Vapor/Vacuum Cannister. However, I removed the smog pump years ago. You have a nice looking truck VZ.
"Tell me and I forget. Teach me and I remember. Involve me and I learn." -Benjamin Franklin

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 18975
Re: 79 K10 build
« Reply #9 on: July 09, 2020, 07:04:59 PM »
Well once again, I've been too busy to update anything. I've been doing major renovations to my property and in between I've been tearing into this poor butchered beast. I stripped it down to the frame, painted and coated the frame. Fixed the cab, floors, corners and rockers. I fixed the hacked wiring harness and bypassed fusible links.  The back of the cab had more waves than the ocean so now I am at the point where I am ready to finish the cab up. Another day of sanding and I'll be ready to prime the cab. I am hoping to have it ready for paint in about two weeks but time will tell.



,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline JohnnyPopper

  • Senior Member
  • ****
  • Posts: 2518
  • Old Goof
Re: 79 K10 build
« Reply #10 on: July 10, 2020, 12:32:08 PM »
and bypassed fusible links

I saw what you did there...
1957 Apache 3100 235 Inline 6, 3 on the tree
1973 C-20, 3+3 454 4BBL TH400  Water Injection
1978 K-10, 350 4BBL TH350 NP203 M.M. Part time Kit/Hubs
1980 C-10 under construction

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 18975
Re: 79 K10 build
« Reply #11 on: July 11, 2020, 06:32:00 AM »
Meaning I FIXED all of the bypassed fusible links.
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6429
Re: 79 K10 build
« Reply #12 on: July 11, 2020, 10:01:17 AM »
Whew!   :D



It's really discouraging to discover the number of mines set adrift in the wake of others.  Hidden bombs waiting to explode!

The truck looks mighty happy framed by that verdant woodland!  Like a rejuvenated pony waiting to break free of its corral.

Nice work!   8)
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 18975
Re: 79 K10 build
« Reply #13 on: July 11, 2020, 11:26:11 AM »
Yes this truck was massacred and all of the fusible links were replaced with butt connectors connected to more butt connectors.

That's my new corral I built, soon to be paved. Letting the base settle REALLY good since I brought in about 40 triaxles of material  :o
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 18975
Re: 79 K10 build
« Reply #14 on: August 16, 2020, 05:15:53 PM »
Made some progress while completing my $46,000 driveway



















 












































,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10