Author Topic: Fire wall wire tray  (Read 901 times)

Offline Swampyankee74

  • Frequent Member
  • **
  • Posts: 321
  • Keep em alive
Fire wall wire tray
« on: May 12, 2023, 01:18:19 PM »
I'm having a hard time finding a place to purchase a new wire holder that goes along the top of the firewall. Does anyone know where I can find this? For a 1974 gmc c1500

Offline Swampyankee74

  • Frequent Member
  • **
  • Posts: 321
  • Keep em alive
Re: Fire wall wire tray
« Reply #1 on: May 12, 2023, 01:19:24 PM »
Pic

Sent from my SM-S515DL using Tapatalk


Offline Mike81K10

  • Junior Member
  • ***
  • Posts: 905
Re: Fire wall wire tray
« Reply #2 on: May 12, 2023, 07:10:43 PM »
I got one from a salvage yard. You may find one this is not necessarily from your model vehicle. Other vehicles may have one that will work if you look around.
"Tell me and I forget. Teach me and I remember. Involve me and I learn." -Benjamin Franklin

Online JohnnyPopper

  • Senior Member
  • ****
  • Posts: 2555
  • Old Goof
Re: Fire wall wire tray
« Reply #3 on: May 12, 2023, 07:12:03 PM »
Mike is pry right, but I really doubt you'll find a stock replacement.

You can use the corrugated plastic tube with a split.

While you're at it, lower the entire harness to follow the sheet metal going over the bell housing.

Will be a lot cleaner, cause that is just UGLY... ;D
1957 Apache 3100 235 Inline 6, 3 on the tree
1973 C-20, 3+3 454 4BBL TH400  Water Injection
1978 K-10, 350 4BBL TH350 NP203 M.M. Part time Kit/Hubs
1980 C-10 under construction

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19021
Re: Fire wall wire tray
« Reply #4 on: May 12, 2023, 07:30:48 PM »
As far as I know, they are not and never were reproduced. My 74 looked like that too and I tossed it 25 some odd years ago. 73-74 were the long ones and after that I'm pretty sure they went to the short one for the remainder of the years. Since yours is all thereish you can reproduce it or try and repair it.
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Swampyankee74

  • Frequent Member
  • **
  • Posts: 321
  • Keep em alive
Re: Fire wall wire tray
« Reply #5 on: May 12, 2023, 07:46:04 PM »
Thank you all. Mine is still functional, not torn or anything.  Just between heat and gravity it looks like shoot. I'll probably throw it in parts pile and go with corrugated. Was just hoping someone made a direct fit part

Sent from my SM-S515DL using Tapatalk


Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19021
Re: Fire wall wire tray
« Reply #6 on: May 13, 2023, 08:06:05 PM »
Clean it real good and glue it to a thin metal strip so it doesn't look like it's melting in and I bet it will look mint.
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Online JohnnyPopper

  • Senior Member
  • ****
  • Posts: 2555
  • Old Goof
Re: Fire wall wire tray
« Reply #7 on: May 13, 2023, 08:38:14 PM »
Now that's an idea VZ!

OEM all the way!
1957 Apache 3100 235 Inline 6, 3 on the tree
1973 C-20, 3+3 454 4BBL TH400  Water Injection
1978 K-10, 350 4BBL TH350 NP203 M.M. Part time Kit/Hubs
1980 C-10 under construction

Offline Swampyankee74

  • Frequent Member
  • **
  • Posts: 321
  • Keep em alive
Re: Fire wall wire tray
« Reply #8 on: May 13, 2023, 09:18:27 PM »
That is a good idea, a little reinforcement

Sent from my SM-S515DL using Tapatalk


Offline mcarter

  • Newbie
  • Posts: 3
  • Newbie
Re: Fire wall wire tray
« Reply #9 on: May 14, 2023, 01:59:05 PM »
Think they are called a wire gutter, there's one on eBay now and several of the truck parts folks show them in catalogs.

Online Mr Diesel

  • Frequent Member
  • **
  • Posts: 332
  • Aaron
Re: Fire wall wire tray
« Reply #10 on: May 14, 2023, 04:26:40 PM »
1976 C20 Crewcab, 6.2L/SM465
1982 K30 Crewcab , 427TD/TH400
1983 C30, 6.2L/TH400
1983 K30 Crewcab 454/700R4
1986 K10 350/400. 1989 K30 cab/chassis 454/SM465

Offline Swampyankee74

  • Frequent Member
  • **
  • Posts: 321
  • Keep em alive
Re: Fire wall wire tray
« Reply #11 on: May 14, 2023, 04:42:57 PM »
That would work. Looks like could cut and drill to fit

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19021
Re: Fire wall wire tray
« Reply #12 on: May 14, 2023, 04:57:26 PM »
The 67-72 version might be the closest thing to it
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Swampyankee74

  • Frequent Member
  • **
  • Posts: 321
  • Keep em alive
Re: Fire wall wire tray
« Reply #13 on: May 14, 2023, 08:15:43 PM »
I will check that out also! Thank you!