73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: dragmine on April 02, 2006, 10:09:00 AM
-
Hey folks. Im having a problem locating longer wheel studs for my 78. I bought new wheels and they call for 1 and 1/2 the diameter of the stud which is 3/4" I have 5/8"thread not enough.Im trying to locate hardened studs for the rear 10 bolt as i drag it.And longer ones for the rotors.ARP and Moroso do not list any thing.Any ideas on cross reference from other vehicles or companys that might make some. I can supply specs. if needed . thanks. Edited by: dragmine at: 4/3/06 8:00 pm
-
Just go to an autoparts store and match them up...
or look online. Google wheel studs
www.moserengineering.com/...p?CatID=17
-
You have 3/4" diameter wheel studs?! Whew.
-
good eye.No! 1/2" stud.And ive been to the local parts store.All I need is 1/4 to 1/2" longer stud.A Ford econoline will fit the rotors which is longer but the nurl is not quite the same,but I think they will work.Its the rear I am having problems with.I dont really want to drill the axles
-
Try a Summit Racing or a Jegs catalog. Summit has Moroso wheel studs 1/2" X 3" long in 4 different knurl sizes.
Hope this helps.
Randy in Kentucky
-
Thanks.I did not know they had the different nurl sizes.The list I got on line only had one close.Ill give them a call.Thank again. Jim Nova Scotia. Edited by: dragmine at: 4/5/06 7:59 pm