Registration and Posting Agreement
Hi all, looking for some input on my rear harness for the lights, currently the harness ends as 4 separate spade connectors, then under the bed it splits to the tail lights, and while there was a hitch, there was no harness when I removed it. So I want to find a way to keep the harness detachable from both the tail lights and from the trailer Plug. If I do some sort of junction block, it will need to be water proof-of which I have not found a lot of sources for blocks like that; plus its not easily detachable.So my 3 basic requirements are easily detachable, waterproof/resistant and clean looking.Thoughts?
http://www.ebay.com/itm/5Pairs-4Pin-IP65-Waterproof-Connector-0-3mm-Male-Female-Black-Cable-22AWG-/172008808458
So, presently, the rear lamp harness terminates in four spade connectors that the rear lamps plug into and you want the option of "independently unplugging" the rear lamps and the trailer socket pigtail from the rear lamp harness? Do you need an option of tying additional wiring into the rear lamps in the future?Here's one source for weatherproof junction boxes from a quick Internet search... OZ Auto ElectricsI use WeatherPack connectors for the plugs. They are waterproof and carry ample current. Several configurations are available to suit your needs.