General Site Info > General Discussion
Windshield wiper hose
bd:
The later design windshield washer plumbing has a hose nipple immediately adjacent to each wiper arm axle that protrudes ~1" from the cowl. The nozzles are built into the business end of the wiper arms near the wiper blade attachment pins. The hose "clip" was more like a 4" long conduit that snapped onto the arm from below. You may be able to fabricate a makeshift replacement from some UV stabilized black plastic tubing.
Mike81K10:
I just check online at the local parts store. They sell the wiper arm with all intact (wiper arm, nozzle, hose, and spray tip) for less than $30.
If the local parts stores have it, perhaps the forum's store will also have it.
ehjorten:
--- Quote from: bd on April 30, 2024, 02:35:12 PM ---The later design windshield washer plumbing has a hose nipple immediately adjacent to each wiper arm axle that protrudes ~1" from the cowl. The nozzles are built into the business end of the wiper arms near the wiper blade attachment pins. The hose "clip" was more like a 4" long conduit that snapped onto the arm from below. You may be able to fabricate a makeshift replacement from some UV stabilized black plastic tubing.
--- End quote ---
Not only that, but the cowl panel had larger openings around the wiper posts to accommodate the washer hose routing.
VileZambonie:
Google this part # 15581004
Captkaos:
--- Quote from: Mike81K10 on April 30, 2024, 02:49:23 PM ---If the local parts stores have it, perhaps the forum's store will also have it.
--- End quote ---
No current vendor for that...
Navigation
[0] Message Index
[*] Previous page
Go to full version