Recent Posts

Pages: [1] 2 3 ... 10
1
Engine/Drivetrain / Re: 357 (350 - .40 Over) Build Questions Etc
« Last post by VileZambonie on Today at 05:57:51 PM »
It's because you need the roller cam pushrods. Like a 1995 caprice 5.7L engine etc
2
Engine/Drivetrain / Re: 357 (350 - .40 Over) Build Questions Etc
« Last post by Mike81K10 on Today at 05:37:30 PM »
My pushrods measurements came up .600 shorter than the OEM I had in my crate engine. Don't know if it is partly because of 1.6 scorpion roller rockers, the heads, or the roller engine block. Everything is different then the old flat tappet GM Block. My old pushrods were 7.800.
3
Power Windows & Door Locks / Re: Dead short window switch
« Last post by VileZambonie on Today at 07:45:06 AM »
It sounds like you installed aftermarket power window motors and switches. We can't help you unless you post the wiring diagrams and detail what you did.
4
Instrumentation / Re: A-pillar gauge mount
« Last post by Shifty on May 03, 2024, 06:13:23 PM »
Thanks Chris.
5
Instrumentation / Re: Tachometer for 81 Chevy k10
« Last post by Mike81K10 on May 03, 2024, 02:53:22 PM »
Thanks!
6
Instrumentation / Re: A-pillar gauge mount
« Last post by Captkaos on May 03, 2024, 02:17:43 PM »
None that I would recommend unless you are 11 feet tall and have the roof cut off the truck.  We are looking into producing one but we have several that have just used modified a-trim on just one side.
7
Power Windows & Door Locks / Re: Dead short window switch
« Last post by Captkaos on May 03, 2024, 02:15:23 PM »
I am confused on what you are actually trying to do...  Are you trying to find the short or?
8
General Discussion / Re: Windshield wiper hose
« Last post by Captkaos on May 03, 2024, 02:13:01 PM »
Quote from: Mike81K10 on April 30, 2024, 02:49:23 PM
If the local parts stores have it, perhaps the forum's store will also have it.
No current vendor for that...
9
Instrumentation / Re: Tachometer for 81 Chevy k10
« Last post by Captkaos on May 03, 2024, 02:10:57 PM »
If you understand wiring it is a pretty simple install.  I have All the RTX gauge sets in stock, when you are ready just email me webmaster@73-87chevytrucks.com
10
Instrumentation / Re: Tachometer for 81 Chevy k10
« Last post by Mike81K10 on May 03, 2024, 01:48:39 AM »
Not sure how much work it will take to install. However I like the RTX gauges. I noticed on the Dakota WEB site they say you can add 16 extra gauges. I did not look at all of it yet but will look into it and what is all involved to install it. Many color options as well!
Pages: [1] 2 3 ... 10