73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: zieg85 on December 28, 2011, 10:17:57 PM

Title: Power Torque Industries gear splitter?
Post by: zieg85 on December 28, 2011, 10:17:57 PM

Does anyone have any personal experience with a Power Torque Industries 2XT gear splitter.  Not much info out on these except a YouTube video and a few other mentions on the internet.  I found one locally and am going to see it tomorrow.

Title: Re: Power Torque Industries gear splitter?
Post by: bake74 on December 29, 2011, 12:53:55 AM

     You are talking about the splitter that goes between the bell housing and transmission correct ?  Your truck is auto right, which will make the installation a little easier.

Title: Re: Power Torque Industries gear splitter?
Post by: zieg85 on December 29, 2011, 10:09:04 AM

Quote from: bake74 on December 29, 2011, 12:53:55 AM

     You are talking about the splitter that goes between the bell housing and transmission correct ?  Your truck is auto right, which will make the installation a little easier.

Yes that is the splitter I am referring to.  And no this is for my 85C20 with the SM465 in it.