73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Performance => Topic started by: Jakethesnake73 on June 24, 2016, 10:07:34 PM
-
My valve guides are going bad so i might as well upgrade. I have 600 cfm edlebrock i think what would be the best cam heads and intake. Id want a roller cam for sure. I just want a little more punch and hopefully some tire squeal ehen i mash the throttle down
Sent from my SAMSUNG-SM-G891A using Tapatalk
-
what are we working on?
600 cfm should be good enough unless you plan on turning 6000 rpms
the cam and intake should be in the same rpm range. i cant tell you which one to get ill let rich or someone else tell you
-
73 k10 with a 350
Sent from my SAMSUNG-SM-G891A using Tapatalk