« previous next »
Pages: [1]   Go Down

Author Topic: Heads cam intake and carb?  (Read 1745 times)

Offline Jakethesnake73

  • Registered Users
  • *
  • Posts: 122
  • Newbie
Heads cam intake and carb?
« on: June 24, 2016, 10:07:34 PM »
My valve guides are going bad so i might as well upgrade. I have 600 cfm edlebrock i think what would be the best cam heads and intake. Id want a roller cam for sure. I just want a little more punch and hopefully some tire squeal ehen i mash the throttle down

Sent from my SAMSUNG-SM-G891A using Tapatalk
« Last Edit: June 25, 2016, 06:51:02 PM by Jakethesnake73 »
Logged

Offline Irish_Alley

  • Tim
  • Global Moderator
  • Senior Member
  • *****
  • Posts: 13319
  • Family is not an important thing. It's everything.
Re: Heads cam intake and carb?
« Reply #1 on: June 25, 2016, 01:01:04 PM »
what are we working on?
600 cfm should be good enough unless you plan on turning 6000 rpms
the cam and intake should be in the same rpm range. i cant tell you which one to get ill let rich or someone else tell you
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline Jakethesnake73

  • Registered Users
  • *
  • Posts: 122
  • Newbie
Re: Heads cam intake and carb?
« Reply #2 on: June 25, 2016, 06:50:39 PM »
73 k10 with a 350

Sent from my SAMSUNG-SM-G891A using Tapatalk

Logged
Pages: [1]   Go Up
« previous next »