Author Topic: 1980 k-10 driveshaft length  (Read 2729 times)

Offline 2tone4by

  • Newbie
  • Posts: 48
  • Newbie
1980 k-10 driveshaft length
« on: November 13, 2016, 09:58:18 PM »
Anyone know the driveshaft length for the rear shaft. It is a shortbed with a th350 and 205 transfer case.....thanks

Offline Militiaman55

  • Newbie
  • Posts: 47
  • 74 K10 Cheyenne
Re: 1980 k-10 driveshaft length
« Reply #1 on: November 26, 2016, 01:14:12 AM »
If you still need this I can measure mine.  It's a 74 Short Bed with a th350/205, running to a 12 bolt.

Rob

Offline 2tone4by

  • Newbie
  • Posts: 48
  • Newbie
Re: 1980 k-10 driveshaft length
« Reply #2 on: November 26, 2016, 11:54:41 AM »
If you still need this I can measure mine.  It's a 74 Short Bed with a th350/205, running to a 12 bolt.

Rob


Sent from my iPad using Tapatalk

Offline 2tone4by

  • Newbie
  • Posts: 48
  • Newbie
Re: 1980 k-10 driveshaft length
« Reply #3 on: November 26, 2016, 11:56:24 AM »
Yes, that would be great....much thanks. If not too much trouble please give me the front shaft length as well.....thanks again


Sent from my iPad using Tapatalk

Offline Militiaman55

  • Newbie
  • Posts: 47
  • 74 K10 Cheyenne
Re: 1980 k-10 driveshaft length
« Reply #4 on: November 26, 2016, 09:20:03 PM »
Well crap, after really thinking about it I don't think I can help.

Your reply reminded me my front shaft is no longer stock as I had a new one built to accommodate the 6" lift I have on the truck.  The rear shaft is still stock.  However, it is extended more than it would be at stock height. 

Aside from pulling the lift and putting everything back to stock I unfortunately can't assist. 

My apologies...

Rob.