« previous next »
Pages: [1]   Go Down

Author Topic: Warn locking hub problem  (Read 4087 times)

Offline Kevin108

  • Frequent Member
  • **
  • Posts: 323
Warn locking hub problem
« on: December 29, 2002, 02:36:00 PM »
My truck's recently eaten the 2nd Warn manual locking premium hub on the passenger side in 7 months.  Every time the little sleeve on the very rear that holds the center section in place disintegrates.  Does this indicate anything wrong, do all hubs just not last, or does Warn just make junk?

87 Silverado 4x4 Longbed Pickup
My Mods | Truck Pics | Kevin108@PavementSucks.com
Maker of 43 point turns!

Logged

Offline oscarone

  • Registered Users
  • *
  • Posts: 133
hubs
« Reply #1 on: December 30, 2002, 09:22:00 PM »
It sound to me like you have another problem.  Check your outer axles and u-joints. Also, be sure that when you go to "free" they are not hanging up.  

Logged

Offline 79GMC4x4

  • Registered Users
  • *
  • Posts: 155
Re: hubs
« Reply #2 on: December 30, 2002, 10:25:00 PM »
Bearings worn?

'79 GMC shortbed 454 th400 14 bolt FF NP205 Dana 60

Logged

Offline Kevin108

  • Frequent Member
  • **
  • Posts: 323
Re: hubs
« Reply #3 on: January 09, 2003, 04:47:00 PM »
I've been e-mailing back and forth w/ Warn for a couple days. Told them I tightened the wheel bearing. They said they'd send me a new hub. I'm trying to get them to replace all 3 so I have spares though.  

87 Silverado 4x4 Longbed Pickup
My Mods | Truck Pics | Kevin108@PavementSucks.com
Maker of 43 point turns!

Logged

Offline Kevin108

  • Frequent Member
  • **
  • Posts: 323
Re: hubs
« Reply #4 on: January 10, 2003, 04:29:00 PM »
Wow...I am totally impressed with Warn and you should be too!

Quote:
To: Kevin <kevin108@pavementsucks.com>
Subject: RE: Support: Warn locking hub problem


Good day Kevin,


It's reassuring to know that the bearings were the problem, your hubs should
last a long time now.  I'll go ahead and send 2 hubs, you can keep any of
the old ones as spares, but hopefully you won't need them.


They are shipping on the 14th, sorry I could not get them out sooner.


Best regards,


Steve Schoenfelder
Warn Industries

87 Silverado 4x4 Longbed Pickup
My Mods | Truck Pics | Kevin108@PavementSucks.com
Maker of 43 point turns!

Edited by: Kevin108 at: 1/10/03 5:42:58 pm
Logged

Offline 83CHEVY

  • Registered Users
  • *
  • Posts: 134
Re: hubs
« Reply #5 on: January 14, 2003, 09:54:00 AM »
My truck has had a set of cheapie Mile Marker hubs on it every since I have owned it.  I have never had any trouble with those, and I think Warn are better than what I have.  I only use 4WD about once a year though.  I have rebuilt the entire front end and repacked the front bearings and put a new O-ring kit in the hubs since I have had them.

Glad to see Warn has such good customer service.  I will probably get a set of Warn soon, just because the fake chrome is bubbling on this set I have now (I am picky), and Warn hubs are my top choice.

Mike

Logged

Offline 79GMC4x4

  • Registered Users
  • *
  • Posts: 155
Re: hubs
« Reply #6 on: January 14, 2003, 01:21:00 PM »
Great to hear you have it taken of!8)  

'79 GMC shortbed 454 th400 14 bolt FF NP205 Dana 60

Logged
Pages: [1]   Go Up
« previous next »