73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Interior & Equipment => Steering Columns => Topic started by: fitz on September 23, 2017, 10:59:52 AM
-
Working on an 85 Chevy M1009 Blazer.
I lowered the steering column (non tilt) down to replace the ignition switch. When I removed the ignition switch the dimmer rod fell out.
Any recommendations on how to put this back in? There is a little triangular piece of plastic on the column behind the directional/wiper stalk. Does this piece pop off to gain access for reinstalling the rod? I can pull this piece loose, but figured I'd ask before forcing it off.
Thanks for any suggestions.