Ok guys, have a bit of a project here. I have a 86 k10 long bed that is my baby. Lots of years and love has gone into her but its time for some updates.
Here's the plan. I have a 94 c2500 350 4l80e 2wd parts truck. I'm wanting to pull the throttle body injection off of it and put it on my 86. Obviously I will need to pull the computer and all related harnesses.
So here's the first question. My 86 350 is 30 over mild cam with only about 5k on it. Can I pull the 94 heads and put them on my older block? I know the TBI intake won't fit my older heads.
Second question. I plan on using the same 700r4 that's in the 86. Does the 94 4l80e trans have a stand alone computer or is it all in 1 with the engine? If all in 1 how will that affect the computer not having a trans to control.
Third question. If I can't use the 94 computer because of the trans I have a friend with a 90 3500 that was converted to carb and had a 350 TBI and 700r4 stock. He has no wiring but does have the computer. Will the 90 computer work with 94 wiring harness.
Thanks in advance for info on this.