Author Topic: Restoration Parts  (Read 2167 times)

Offline bshrubb

  • Newbie
  • Posts: 4
Restoration Parts
« on: April 09, 2018, 10:28:18 AM »
Just wondering what people’s opinions are on where the best quality restoration parts are coming from.

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7543
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Restoration Parts
« Reply #1 on: April 09, 2018, 03:03:16 PM »
start here and support this site.  email the site owner if you don't see what you are needing.  Not everything is listed and if he doesn't carry it he will direct you to the right folks.  Remember you get what you pay for

http://store.73-87chevytrucks.com/merchant2/
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline bshrubb

  • Newbie
  • Posts: 4
Re: Restoration Parts
« Reply #2 on: April 10, 2018, 12:32:27 PM »
Thank you, I totally agree. That’s the problem though, the parts I’m looking for which are the cab mouldings with the bow ties and the rear section that goes across the back of the cab aren’t available through this forums store. So far I’ve found that   Truck and Classic Industries sell these items. I don’t know who else sells these parts but I’m just curious to see where people are getting parts from and if they are happy with the quality and fit & finish.

Offline 77 Scottsdale

  • Newbie
  • Posts: 68
Re: Restoration Parts
« Reply #3 on: April 10, 2018, 03:00:53 PM »
I need a 4wd jack and I cant find any website that sells them and I cant even find any 4wd trucks being parted out on CL. Some parts aren't reproduced I guess

Offline 77 Scottsdale

  • Newbie
  • Posts: 68
Re: Restoration Parts
« Reply #4 on: April 11, 2018, 03:10:38 PM »
Classic Parts is a pretty good one too

Offline Stewart G Griffin

  • Senior Member
  • ****
  • Posts: 3324
Re: Restoration Parts
« Reply #5 on: April 11, 2018, 05:48:59 PM »
The salvage yard.

Oh, you mean NEW?


i don't know----try emailing this guy:
https://www.youtube.com/watch?v=04YJkVkv2k0&t=218s