Hi All, I have had this truck for about a year now. SBC 350, roller cam (mild street/strip), aluminum heads, Holley Sniper EFI, TCI Streetfighter TH350 w 2k stall, 3.73 rear end. Motor is ~400HP with about 10k miles on it. Transmission was just finished and installed a few weeks ago. Three output shaft seals later and it doesn't even leak :P
I am loving the Holley Sniper EFI system. I bought the master kit that came with pretty much everything needed including the pump, filter, and lines.
This summer I will be looking to start on the interior. It's not in bad shape now by any means, but you know how it is :P It does have some really junky bucket seats in it atm that belong in a dumpster. Will be looking to put a bench back in it when I do the rest of the interior black/silver/grey. Then it's paint and wood in the bed (the wood in there now is in pretty rough shape, but functional enough).
I'll be digging through the forums for idea's and to answer some of my questions. I'm sure you'll see some posts from me in the future with new pics and likely new questions.
Linked a picture of the truck and a picture from the end of the Sniper EFI install:
https://imgur.com/a/HesDXGC#cBcOYeR
1
