Author Topic: 062 Heads  (Read 1804 times)

Offline surfridermoflo

  • New Users
  • Posts: 2
  • Newbie
062 Heads
« on: March 26, 2018, 11:47:30 AM »
I am just about finished with my 062 vortec heads but I have a question. Is it necessary to lap my valve seats with both course and fine grit compound? I just completed lapping all of the valve seats with the course grit. Thoughts?


Sent from my iPhone using Tapatalk

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 18979
Re: 062 Heads
« Reply #1 on: March 26, 2018, 11:49:34 AM »
If you used coarse then yes you need to use the fine to finish and thoroughly was them afterwards.
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline surfridermoflo

  • New Users
  • Posts: 2
  • Newbie
Re: 062 Heads
« Reply #2 on: March 26, 2018, 11:59:43 AM »
If you used coarse then yes you need to use the fine to finish and thoroughly was them afterwards.
Ok, my plan was to final wash the heads before putting all of the valves, lifters, etc. thanks for the advice.


Sent from my iPhone using Tapatalk

Online Rapid Roy

  • Junior Member
  • ***
  • Posts: 635
  • Euless, Texas
Re: 062 Heads
« Reply #3 on: March 26, 2018, 01:42:25 PM »
Welcome
1974 Cheyenne 10 LWB STOCK 350 W HEI /TH350/AC/4 BBL Quadrajet
Mopar by Birth
Chevy by Choice