73-87 Chevy _ GMC Trucks > 73-87 Chevy & GMC Trucks
75 K20 starter solenoid
(1/1)
aren are:
Greetings,
Can the starter solenoid be replaced without pulling the starter?
Looks possible at a glance...
Thanks,
Aren
Mike81K10:
Yes, I did many years ago. Have not done it lately because anymore I just replace the starter. Some starters at local parts shops will give a lifetime warranty.
Mike81K10:
Sorry I missed the part about pulling the starter. You have to pull the starter. I was thinking without replacing the starter. Not much to pulling the starter though! You cannot get to the screws to remove the solenoid with it installed.
You can buy a Starter Solenoid for about $20.00 if you just want to replace it. It is fast and easy to replace. Take out 2-3 screws that hold it on and disconnect the wire on the back. it will come right off.
Captkaos:
Definitely have to pull the starter to get to the solenoid.
Navigation
[0] Message Index
Go to full version