Author Topic: Pinion Angle Help  (Read 804 times)

Offline JohnnyPopper

  • Senior Member
  • ****
  • Posts: 2526
  • Old Goof
Re: Pinion Angle Help
« Reply #30 on: March 26, 2024, 09:18:13 PM »
Push up / Pull down slop is what mine had before I replaced it.

There should be no movement.

Vibration is now gone.
1957 Apache 3100 235 Inline 6, 3 on the tree
1973 C-20, 3+3 454 4BBL TH400  Water Injection
1978 K-10, 350 4BBL TH350 NP203 M.M. Part time Kit/Hubs
1980 C-10 under construction

Offline Backwoodsballer

  • Newbie
  • Posts: 16
  • Newbie
Re: Pinion Angle Help
« Reply #31 on: March 27, 2024, 07:06:57 AM »
Awesome, thanks JohnnyPopper.  I think we are starting to narrow this down.

Ill call into to Tom Woods today and see if they think i should stick with the conventional shaft (OEM) with a single joint on either end or if i should just move up to a double cardon joint.
1978 K10 Cheyanne Long Bed
350 / TH350 / NP203 Part Time