Registration and Posting Agreement
What size is the pump outlet? Probably -6 AN, which is 3/8". The Pollack valve has 3/8" Feed. Most sites will tell you that -6 AN is capable of supporting up to 500 hp.Your 340 lph pump only flows 340 lph at freeflow (0 psi). It doesn't flow that at 60 psi. Plus your injectors will only flow so much.
Run it after the valve.
Also the tcc wiring to disengage the torque converter. Is that just the cruise/tcc wire that should beveired into a brake switch?Sent from my SM-G955U using Tapatalk