73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: RBolig on April 05, 2018, 01:46:50 PM
-
Guys, I need some help. I am removing the solid rear window in my '79 Cheyenne and replacing with a slider (I believe it is aftermarket). I bought a new gasket, and the window assembly does not fit the Precision seal. Is there a special gasket for these windows that are not GM original?
The image shows the seal being too large.
-
They fit a little squirrely until they are installed. There are two different gaskets available, one with a zipper and one without.
-
I got the one with "the zipper", but the gasket looks too large. I am thinking it should fit snug to the window frame at least. Am I wrong?
-
That style gasket goes on the cab first, then you put the window in, then zip it up tight
-
Zieg, Sounds like a plan. I'll give that a try.
-
Zieg85, you were correct, window is now installed. Thanks.
Now, about those pesky chrome corner pieces..... Had to walk away for a while.
-
https://www.youtube.com/watch?v=rJ0QbDzzr2s&feature=youtu.be
-
https://www.youtube.com/watch?v=rJ0QbDzzr2s&feature=youtu.be
Almost as good as Andy from A & R.