All Classified forums require a Site Supporter subscription. It is only $25 per year and you can buy and sell whatever you like on the forum. To become a Site Supporter, go to Your Profile and select "Paid Subscriptions."
...Is the brown wire the power source for the selector switch?
...can you tell me how the two dark [grn] wires receive power? They are the ones that go to the compressor and the pressure switch.
...the brn/wht wires get their power form the selector switch once the switch is turned on, correct?
...the brn/wht wires at the power selector were in the far right slot of the plastic harness. But, when I look at the power selector switch itself there is no copper prong extending out of the switch to make contact with the wires in that position (so no power going to the speed switch via the brn/wht wire). I removed the lt green and brn/wht wire from the harness and moved them over one spot to the left to make contact with the copper points in the switch and when I flipped the switch the 25A fuse blew....
...Looking at the schematic and comparing it to the hi-lo selector harness the colors do not match up. Any ideas?
BD, here are two more pics....